#281S Moly Pure Synthetic Heat Transfer Fluid

Moly Pure Synthetic Heat Transfer Fluid's fluidity at temperatures below -50°F and thermal stability up to 575°F permits its use over a wide range of conditions and it is not significantly affected by long exposure to elevated temperatures, including transients to 870°F.

Moly Pure Synthetic Heat Transfer Fluid is a non-corrosive, non-fouling synthetic heat transfer fluid that is recommended for use in closed system or open system heat transfer applications, where a wide temperature range and environmentally safe fluid is required.

Moly Pure Synthetic Heat Transfer Fluid's fluidity at temperatures below -50°F and thermal stability up to 575°F permits its use over a wide range of conditions and it is not significantly affected by long exposure to elevated temperatures, including transients to 870°F.

It is blended from the finest high quality severely hydro-finished Polyalphaolefin (PAO) synthetic base fluids available that provide the following benefits:

• High thermal and oxidative stability.
• Very low volatility and evaporation characteristics.
• High thermal efficiency for rapid and efficient transfer of heat.
• Low vapor pressure at elevated temperatures.
• High boiling points to prevent pressure buildup.
• Non-fouling on degradation.
• Flash and fire points significantly above 400°F.
• Auto-ignition points above 608°F.
• High viscosity index meaning less change in viscosity with temperature.
• Excellent hydrolytic stability and resistance to emulsification with water.
• Non-corrosiveness.
• Excellent compatibility with all types of seals, materials of construction and finishes commonly used in heat transfer systems.
• Compatible with petroleum oil, ester based, synthetic hydrocarbon and DI, Tri and tertiary phenyl ether base fluids.
• Virtually odorless and essentially non-toxic.
• Long service life for trouble free operation.